1.Control mode and features：
High efficiency energy storage technology in hot room and cold room.
Test room temperature will be changed very fast when dampers are opened or closed.
2.Terchy technologies and manufacturing：
-
Stable test system and sophisticated design and structure
-
Most components are molded and assembled carefully
-
Reliable quality and stable performance
-
Main electrical parts are provided with independent protection switch
3.Programmable controller S7215：
-
Touch screen and human machine interface
-
Language options: Chinese / English
-
Screen backlight and illumination adjustment
-
Memory: 10000 programs
-
Large memory can store your test data as long as 10 years
-
Multi communication interfaces
-
Independent program editor page
Applications
Thermal shock chambers are designed and built to test the tolerance of materials or material structures under the continuous environmental change between extremely high temperature and extremely low temperature. It helps to determine the chemical change or physical damage features of test sample caused by thermal expansion and cold contraction.
Thermal shock chambers are widely used in industries of information and communication, vehicles, new energy, testing and certification, plastics, rubber, electronics, metal products.
Standard complied
GB/T 2423.1-2008 ( IEC 60068-2-1:2007) test A: Cold
GB/T 2423.2-2008 ( IEC 60068-2-2:2007) test B: Dry heat
GB/T 2423.22-2002 ( IEC 60068-2-14:1984)test N: Change of temperature
|
MODEL |
TS-T |
|
VOLUME/CODE |
100A |
200A |
300A |
|
CONTROL SYSTEM |
Smart temperature balance system |
|
TEMPERATURE SET RANGE - HOT |
+60℃～+150℃ |
|
TEMPERATURE SET RANGE - COLD |
-40℃～-10℃ |
|
HOT ROOM SET RANGE |
+60℃〜+200℃ |
|
COLD ROOM SET RANGE |
-65℃〜-10℃ |
|
TEMPERATURE DEVIATION |
≤±2℃
Sensor location to wall distance is 1/10 of chamber interior dimensions.(≧50mm)
|
|
TEMPERATURE CONSTANCY |
±0.5℃ |
|
TEMPERATURE SHOCH RANGE AND TIME |
from -40℃ to +150℃ |
|
about 5min |
|
SOAK TIME AT HIGHEST/LOWEST TEMPERATURE POINTS |
﹥30min |
INTERIOR DIMENSIONS
(WxHxD)CM |
50x45x45 |
65x46x67 |
80x46x81.5 |
EXTERIOR DIMENSIONS
(WxHxD)CM |
145x198x147 |
160x198x194 |
179x198x214 |
|
INTERIOR MATERIAL |
stainless steel #304 |
|
EXTERIOR MATERIAL |
paint coating steel plate |
|
CONTROLLER |
Terchy S7215 color 7 inch LCD touch screen controller |
|
SAFETY DEVICES |
overheat protection
power monitor relay
compressor high pressure/overload/over current protection
buzzer
power switch
thermostat
|
|
LOAD(PLASTIC IC) |
5KG |
7.5KG |
15KG |
|
POWER |
AC 3ф4W+G 380V±10% 50HZ |
|
NOTES：
（1）Air cooling type system and water cooling system available, all performance parameters of standard air cooling chamber are measured at +20℃ ambient & when empty in workspace; all water cooling parameters are with +25℃ cooling water & when empty in workspace.
（2）Sensor measurement method comply with IEC 60068-3-6:2001/ GB/T 2424.6-2006 / JTM K09 :2009. Parameters measured when sensor location to wall distance is 1/10 of chamber interior dimensions.
（3）Pics and spec for reference only. For more details please contact your sales rep.
|
|
MODEL |
TS-T |
|
VOLUME/CODE |
100B |
200B |
300B |
|
CONTROL SYSTEM |
Smart temperature balance system |
|
TEMPERATURE SET RANGE - HOT |
+60℃～+150℃ |
|
TEMPERATURE SET RANGE - COLD |
-55℃～-10℃ |
|
HOT ROOM SET RANGE |
+60℃〜+200℃ |
|
COLD ROOM SET RANGE |
-70℃〜-10℃ |
|
TEMPERATURE DEVIATION |
≤±2℃
Sensor location to wall distance is 1/10 of chamber interior dimensions.(≧50mm)
|
|
TEMPERATURE CONSTANCY |
±0.5℃ |
|
TEMPERATURE SHOCH RANGE AND TIME |
from -55℃ to +150℃ |
|
about 5min |
|
SOAK TIME AT HIGHEST/LOWEST TEMPERATURE POINTS |
﹥30min |
|
INTERIOR DIMENSIONS
(WxHxD)CM
|
50x45x45 |
65x46x67 |
80x46x81.5 |
|
EXTERIOR DIMENSIONS
(WxHxD)CM
|
145x198x147 |
160x198x194 |
179x198x214 |
|
INTERIOR MATERIAL |
stainless steel #304 |
|
EXTERIOR MATERIAL |
paint coating steel plate |
|
CONTROLLER |
Terchy S7215 color 7 inch LCD touch screen controller |
|
SAFETY DEVICES |
overheat protection
power monitor relay
compressor high pressure/overload/over current protection
buzzer
power switch
thermostat
|
|
LOAD(PLASTIC IC) |
5KG |
7.5KG |
15KG |
|
POWER |
AC 3ф4W+G 380V±10% 50HZ |
|
NOTES：
（1）Air cooling type system and water cooling system available, all performance parameters of standard air cooling chamber are measured at +20℃ ambient & when empty in workspace; all water cooling parameters are with +25℃ cooling water & when empty in workspace.
（2）Sensor measurement method comply with IEC 60068-3-6:2001/ GB/T 2424.6-2006 / JTM K09 :2009. Parameters measured when sensor location to wall distance is 1/10 of chamber interior dimensions.
（3）Pics and spec for reference only. For more details please contact your sales rep.
|
|
MODEL |
TS-T |
|
VOLUME/CODE |
100D |
200D |
300D |
|
CONTROL SYSTEM |
Smart temperature balance system |
|
TEMPERATURE SET RANGE - HOT |
+60℃～+150℃ |
|
TEMPERATURE SET RANGE - COLD |
-65℃～-10℃ |
|
HOT ROOM SET RANGE |
+60℃〜+200℃ |
|
COLD ROOM SET RANGE |
-75℃〜-10℃ |
|
TEMPERATURE DEVIATION |
≤±2℃
Sensor location to wall distance is 1/10 of chamber interior dimensions.(≧50mm)
|
|
TEMPERATURE CONSTANCY |
±0.5℃ |
|
TEMPERATURE SHOCH RANGE AND TIME |
from -65℃ to +150℃ |
|
about 5min |
|
SOAK TIME AT HIGHEST/LOWEST TEMPERATURE POINTS |
﹥30min |
|
INTERIOR DIMENSIONS
(WxHxD)CM
|
50x45x45 |
65x46x67 |
80x46x81.5 |
|
EXTERIOR DIMENSIONS
(WxHxD)CM
|
145x198x182 |
160x198x214 |
179x198x234 |
|
INTERIOR MATERIAL |
stainless steel #304 |
|
EXTERIOR MATERIAL |
paint coating steel plate |
|
CONTROLLER |
Terchy S7215 color 7 inch LCD touch screen controller |
|
SAFETY DEVICES |
overheat protection
power monitor relay
compressor high pressure/overload/over current protection
buzzer
power switch
thermostat
|
|
LOAD(PLASTIC IC) |
2.5KG |
5KG |
7.5KG |
|
POWER |
AC 3ф4W+G 380V±10% 50HZ |
|
NOTES：
（1）Air cooling type system and water cooling system available, all performance parameters of standard air cooling chamber are measured at +20℃ ambient & when empty in workspace; all water cooling parameters are with +25℃ cooling water & when empty in workspace.
（2）Sensor measurement method comply with IEC 60068-3-6:2001/ GB/T 2424.6-2006 / JTM K09 :2009. Parameters measured when sensor location to wall distance is 1/10 of chamber interior dimensions.
（3）Pics and spec for reference only. For more details please contact your sales rep.
|